Electrolux E32AF85PQSA Use & Care Manual - Page 10

Browse online or download pdf Use & Care Manual for Freezer Electrolux E32AF85PQSA. Electrolux E32AF85PQSA 23 pages.

uuuuuuuuuuuuuuuuuuuuuu_
Custom
Set TM Electronic
Control Features
Replace F.ter
When the "REPLACE AIR FILTER" LED is illuminated yellow, the air filter needs to be
replaced. The control will signal for air filter replacement after 3600 hours of operation.
After replacing the air filter, reset the air filter timer by pressing the AIR FILTER key for
3 seconds. The "REPLACE AIR FILTER" LED will be illuminated green for 3 seconds,
confirming a timer reset.
iiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiii!iiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiii!iiiiiiiiiiiiiiiiii
iii
uuuuuuuuuuuuuuuuu_
_
uuuuuuuuuuuuuuuuuu
_
uuuuuuuuuuuuuuuuuu_
_
uuuuuuuuuuuuuuuuuuu
_
uuuuuuuuuuuuuuuuuuu_
_
uuuuuuuuuuuuuuuuuuu,
_
uuuuuuuuuuuuuuuuuuuu_
_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;
[{ E/ec{;ro/ux
_c ® N
Li
*'
Control
Lock
To disable the keypads on the control, begin by pressing the CONTROL LOCK key for
,,,,,,,,,,,,,
.......................................................
3 seconds
until "LO" is displayed
for 1 second.
With the control locked, when keys are
pressed on the control panel, "LO" will be displayed. To unlockthe
control, pressthe
CONTROL LOCK keglerS
seconds. The display will show "UL" for 1 second.
'
'0
...................................
Power
Fail
The POWER FAIL indicator light informs you that due to a power failure the cabinet
temperature exceeded 23°F (-5°C). If the power failure lasted more than 1 hour the
display alternates between showing the power failure duration (Hours and DURATION
LED illuminate in the display) and the cabinet temperature (°For °C illuminates) every 1/p
second. This safety feature will aid in determining what food spoilage action to take.
The Power Fail indicator light and duration display can be turned off by pressing the
Alarm Off Key.
[;_]J_i[ectrebN
ICON
Alarms
There are 4 possible conditions that will cause the alarm tone to sound.
High
Temp
Alarm
If the temperature inside the cabinet exceeds 23°F (-5°C), the HIGH TEMP LED
will illuminate, and after 1 hour, the HIGH TEMP Alarm will sound and the cabinet
temperature is shown in the display. The LED and temperature alarm will remain active
until the cabinet temperature is below 23°F (-5°C).
The audible alarm can be turned off by pressing ALARM OFF key.
)