Atid AT870 Manual - Page 12

Browse online or download pdf Manual for PDA Atid AT870. Atid AT870 16 pages. Rf-id bluetooth
Also for Atid AT870: Quick Manual (12 pages), User Manual (11 pages)

Print Page
Atid AT870 Manual
● Bluetooth Manager Reference Guide
1.3 Connecting to Bluetooth Printer(SPP)
BT-Manager is coded only for Hardware support to connect AT870 to a Bluetooth printer to start BT_Manager.
Figure 9. Step-8 BT_Manager Click
※ Save mode then exit program
Apply(Exit) button: turn off BT_Manager while maintaining
connection
Power Off(Exit) button: turn off the power of
BlueTooth(becomes disconnect )
Factory Init button : Blue Tooth module will reset to the initial
state.
Automatic Connection Restoration
In Scan-1 mode, AT870 will restore the former connection after the
following case:
• Recovering the automatic connection state between AT870 and
Bluetooth Printer which supported by hardware way
•Turn off the power of AT870 body
•After you perform a reset or hard reset activity.
•.
Re-run BT_Manager
Re-run the BT_Manager, when you are under the following case.
•To close BT_Manager after it is connected to a printer.
•Do not want to use AT870 and Bluetooth Printer anymore.
•Turn off the connect state through BT_Manager or stop to support power
to the Bluetooth chip modulated in AT870 or want to connect your AT870
to another printer