Bosch Instructions for Use Instruction Manual - Page 7

Print Page

Bosch Instructions for Use Instruction Manual

Steam Drying - Steam Refresh

Steam programmes for unwrinkling or refreshing

– Your dryer has unwrinkling and refreshing programmes that can be used for reducing

odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of

clothing.

– Sorting the laundry according to size, weight, fabric and colour is necessary.

– Only use Short spin/Refresh for fabrics with the same properties.

– During steam generation (required), additional noises may occur.

– The result of refreshing and unwrinkling may vary depending on the type of fabric, size of

the load and programme selected.

– After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-

free on a hanger or a washing line for 15 minutes.

Programmes

Please observe the treatment symbols and manufacturer's instructions on the fabrics.

Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or

wooden parts as well as wax and oil jackets!

Do not use any dryer cleaning sets!

Steam Dry

Minimum Iron Shirt

Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect

optimum results if "non-iron" appears on the care label. After the programme has finished,

the items must be removed immediately and hung crease-free on a hanger or washing line

for 15 minutes. The programme is for up to 5 formal shirts.

Minimum Iron Daily Load

Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics

are smoothed. You can expect optimum results if "non-iron" appears on the care label. After

the programme has finished, the items must be removed immediately and hung crease-free

on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or

1 to 2 larger items.

Steam Refresh

Business

Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed

in the washing machine

see the care label. The programme only refreshes fabrics and

does not clean them. After the end of the programme, the items must be removed

immediately. Programme for 1 suit or 1 to 2 smaller items.

Freshen up

Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be

suitable for dryers

see the care label. The programme refreshes fabrics only, and does

not clean them. After the programme has finished, the fabrics must be removed

immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.

Steam Drying - Steam Refresh

Your water tank empties automatically after the programme has finished.

Filling the water tank:

Fill the dryer's water tank with distilled water before every Steam Dry - Steam Refresh cycle.

1. Move the programme selector to Steam Dry

or Steam Refresh .

The

symbol appears in the display.

2. Remove the condensation tank completely.

Before every Steam Dry - Steam Refresh cycle, fill the water tank with

distilled water only. Do not use tap water, condensation or additives.

3. Fill the water tank. Use the jug supplied.

If the water tank filter is dirty

See page 4.

4. Pour the distilled water into the filling hole on the water tank,

until the

symbol goes out on the display panel.

If drying the recommended load, approximately 250 to 300 ml of distilled

water is used in the Steam Dry - Steam Refresh programmes.

5. Insert the condensation container all the way.

6. Start the Steam Dry or Steam Refresh programme.

Cleaning is therefore not required

clean the filter in the water tank.