Anderson ANM76 Operation Manual - Page 5

Browse online or download pdf Operation Manual for Burner Anderson ANM76. Anderson ANM76 13 pages.

Print Page

This type of burner can provide great temperature uniformity. The burner body is cast iron,

other parts are stainless steel. Combustion air and gas in the burner body flow to the

surface through different channels, and part of the combustion air and gas are premixed

before exiting the surface to optimize emissions and efficiency.

The combustion air is connected the burner through the air duct, by providing the correct

air volume and pressure to the burner. Brackets are used to support the burner or air duct,

and fuel flow adjustment is achieved through a flow control valve. Ignition is ignited by a

separate point burner. Flame monitoring equipment can be placed at both ends of the

burner. The air pressure switch can be installed on the burner to detect whether the

pressure of the combustion air meets the requirements.

ANM76 Series Burner Advantage:

–

Excellent emission: NO

–

Compact structure, with large heat input.

–

High turn down ratio to 10:1 to match different requirement.

–

The modular assembly is adopted; length of each module is 150 mm or 300 mm.

Output of 300 mm module can get as high as 300 kW, different modules can be

installed with shape of line shape, "I" shape, "T" shape according to customer

requirement.

–

On ratio control design conception.

–

Reliable operation performance, once commissioning is complete, it is stable under

same condition, no need extra adjustment or maintenance.

–

Suit for different gas fuels such as natural gas, LPG or hydrogen, etc.

–

Special use for middle-high temperature application of heating 400°C process air to

850°C

6. Burner Component Introduction

ANM76 series burners are mainly made up of burner body, fire plate as flame shield,

diffuser plate. Different parts were connected by rivets, screws and bolts.

Shown as below Fig 1 is the diagram of the burner, in which the air wing and outer

connectors are made of stainless steel, gas channels and connectors are also stainless steel.

Anderson Thermal Soluions（Suzhou）Co., Ltd

Anderson Thermal Solutions – ANM76 Burner Operation Manual

and CO emissions are very low.