Bosch WTA74100ZA Installation And Operating Instructions Manual - Page 7
Browse online or download pdf Installation And Operating Instructions Manual for Dryer Bosch WTA74100ZA. Bosch WTA74100ZA 8 pages.
Also for Bosch WTA74100ZA: Features And Specifications (20 pages)
![Bosch WTA74100ZA Installation And Operating Instructions Manual](/uploads/products/server2/1421994/1421994.jpg)
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
6 kg
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2200 W
Fuse protection
10 A
Product number
-> Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
These are guide values determined under standard
conditions. Deviations of up to 10% are possible.
Cottons 6 kg
Cupboard dry*
Iron dry*
Easy-care 3 kg
Cupboard dry*
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on overvoltage and undervoltage,
fabric type, composition of the laundry to be dried, residual moisture in the fabric and the
amount of the load.
Optional accessories
Ordering
code
Exhaust air duct set
(according to model)
WTZ
The exhaust air is extracted via a hose.
1130
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11311
to save space.
The dryer must be fastened to the washing machine using this connection set.
Built-under installation
WTZ
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
10290
Platform
WMZ
20460
For improved loading and unloading. The basket located in the drawer can be used for
carrying laundry.
Spin speed rpm
Drying time** in
(residual moisture)
min incl. 8 min
cooling time
1400 (approx. 50 %)
100
1000 (approx. 60 %)
105
800
(approx. 70 %)
140
1400 (approx. 50 %)
78
1000 (approx. 60 %)
80
800
(approx. 70 %)
100
800
(approx. 40 %)
38
600
(approx. 50 %)
50
What to do if ...
Repairs must only be carried out by the after sales service or an authorised specialist.
Before contacting the after-sales service, please check whether you can remedy the fault
yourself. When you contact the after-sales service, you will be charged call-out costs if a
technician is required, even within the warranty period. You can find your nearest after-sales
centre from the list enclosed. When contacting the after-sales service, please quote the product
number (E no.) and the production number (FD) of the appliance ( -> inside of the door).
Start/Stop indicator light does
not light up.
Filter/Vent/Hose indicator light
flashes.
Dryer does not start.
Energy
consumption**
Programme terminated shortly after
in kWh
starting.
Water is leaking out.
3.00
The door opens by itself.
3.25
The required degree of dryness
4.00
was not achieved or the drying time
2.20
was too long.
2.40
3.00
1.00
1.30
Laundry damp.
The humidity in the room has
increased significantly.
One or more indicator lights are
flashing.
Power cut.
Condensation in the exhaust air
duct.
If you cannot rectify a fault yourself or a repair is necessary:
– Turn the programme selector to o (Off).
– Remove the mains plug from the socket.
– Call the after-sales service -> after-sales service directory.
9
Mains plug plugged in?
Programme selected?
Check the socket fuse.
Clean the fluff filter -> page 4.
Exhaust air duct blocked or bent?
Clean the exhaust air duct -> page 6.
If necessary, clean the insect screen on the exhaust air
pipe.
Start/Stop button pressed?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter -> page 4.
Ambient temperature higher than 35 °C -> ventilate the
room.
Unsuitable programme selected? -> page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure -> Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean the
sensors -> page 6.
Use the next drying programme up or the timer
programme -> page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Clean the fluff filter -> page 4.
Check the installation conditions -> page 8.
Exhaust air duct blocked or bent?
Clean the exhaust air duct -> page 6.
Switch off, allow to cool, switch back on and restart the
programme.
Remove the laundry from the dryer immediately and
spread it out. Heat may escape.
Exhaust air duct too long? Check the maximum exhaust air
duct length. Further information -> Installation instructions
for exhaust air duct.
10