Community dSPEC Connect Trobleshooting Manual - Page 12

Browse online or download pdf Connect Trobleshooting Manual for Recording Equipment Community dSPEC. Community dSPEC 20 pages.

Print Page

6. Restart Resyn

Click

[ X ]

to close Resyn.

Save changes if you wish.

Start Resyn by double-clicking on the desktop icon

Start >> All Programs >> Community Professional Loudspeakers >> Resyn ...and click on Resyn.

Click the Windows Start button

Restart.

Ensure the local computer shares an IP subnet with dSPEC.

If automatic IP addresses are being used, please set the Resyn computer address to automatic as described

below.

If static IP addresses are being used, please ensure the local computer and all dSPECs are configured to have

unique IP addresses on the same subnet.

Tip: Read more about subnets and automatic versus static IP addresses in

Resyn and dSPEC generally work best with automatic IP addressing. Community ships dSPEC with automatic IP

addressing enabled. Most computers also default to having automatic IP addressing enabled. So generally IP

addresses do not have to be manually set for Resyn to communicate with dSPEC.

There are exceptions however. You may have used gear from other manufacturers that required you to set a

static IP address on the local computer. In this case you will want to re-enable automatic IP addressing for Resyn.

Alternately you may decide you prefer your dSPEC and computer to have fixed addresses – especially if you need the

computer to concurrently communicate with other manufacturer's equipment and dSPEC.

can help you decide if static IP addresses are needed for your network.

, or you can start Resyn from your Start menu. Go to

, click Restart, or click the arrow next to the Lock button

IP Address Tips

on page 4.

IP Address Tips

P a g e

| 12

and then click

on page 4