Carogusto sisisi QEAMER User Manual - Page 7
Browse online or download pdf User Manual for Coffee Maker Carogusto sisisi QEAMER. Carogusto sisisi QEAMER 9 pages.
Also for Carogusto sisisi QEAMER: Installation And Operating Instructions Manual (20 pages)
Print Page
Additions to the user manual
Technical Service sisisi QEAMER 230V / 400V
7.4 Completion of cleaning
After cleaning, dry all components.
Reassemble and install the clean mixer unit only with clean, disinfected hands.
Before placing the cover, disinfect the dry surfaces of the mixer unit with a disinfectant spray.
When using the disinfectant spray, ensure it is foodsafe and suitable for the
materials in use. Follow the instructions on the disinfectant spray. If you have any
questions, please contact the Carogusto customer service.
7.5 Daily cleaning of additional QEAMER parts
Only the mixer unit can be cleaned in the dishwasher. Clean and disinfect all other
removable parts by hand.
• Rinse daily the water tank with clean drinking water. In case the QEAMER is not in
use, for example overnight or on weekends, leave the tank open to dry after rinsing.
• Remove the detachable QEAMER parts daily, eliminate the coarse soiling and then
clean them with a mixture of detergent and water. Dry and disinfect cleaned parts
afterwards. Store clean parts on a cleaned surface in the meantime.
• At least once a day, empty and clean the collection tank underneath the QEAMER.
To do this, rinse it and wash it out with a cleaning agent. It is recommended to soak
the wastewater canister with a cleaning agent once a week to reduce odor
formation.
Erstellt von Carogusto AG am 22.09.2023
Carogusto AG / Fehlwiesstrasse 20 / CH-8580 Amriswil / Tel. +41 71 411 77 00 / sisisi.com
•
Press the seal with the groove into the joint at the
bottom of the hold-down device.
Ensure that the seal is evenly pressed in all around.
•
Place the hold-down device (see 1.3) on top of the
mixer unit.
•
To insert the cleaned mixer unit, please note the
following:
The positioning guide (see 1.3 mixer unit) on
▪
the hold-down device shall point forwards
towards the operator.
Guide the coupling of the mixer unit into the
▪
opening of the preparation unit and press
upwards until the mixer unit clicks into place.
Pull down gently to check that the mixer unit
▪
is correctly engaged.
Now, place the cover of the preparation unit
▪
back into place.
Version 1.0
Seite 7 von 9