Atilze Sensor Hub User Manual - Page 14

Browse online or download pdf User Manual for Switch Atilze Sensor Hub. Atilze Sensor Hub 19 pages.

Print Page

6.0

CONNECTOR

All sensing capabilities of Sensor Hub are provided by using the sensor probes. Each

sensor probe can be easily connected to a sensor. The standard length of a sensor

probe is about 150 mm, including waterproof connector, but it could vary due to

sensors dimensions. The sensor probes come in either 3 or 6 pins connector.

Sensor can be easily attached to sensor probes by screwing them into the socket. This

allows user to add or change the sensing capabilities just in minutes.

3 pin Socket & Connector

6 pin Socket & Connector

Each socket has its own protective cap. Please make sure that the protective cap is

screwed tightly when not in used. This is to protect the connector sockets.

Document no: AZ-SH00001

12 |

P a g e