DREAMS Angel Manual - Page 2

Browse online or download pdf Manual for Indoor Furnishing DREAMS Angel. DREAMS Angel 4 pages.

Print Page

Fittings Checklist

Code

Description

Bolt (M8x30mm)

Spring Washer

Washer (22x8mm)

Allen Key (5mm)

Bolt (M6x40mm)

Note:

The following fittings will be found in the box which contains the Sprung Slat Frame. They are not in the main

hardware pack, of the bed itself.

Bolt (M6x15mm)

Support Leg

Additional Tools Required

Long crosshead (Pozi) screwdriver

General Hints & Tips

Please retain your Assembly Instruction and

tools provided, for future use. Periodically

check that all bolts are still tight.

This assembly requires two

people.

Qty

Code

x12

Care & Maintenance

In the unlikely event of missing or damaged parts, please

contact the customer service team on 08442 920000.

When calling this number, please r quote the part code

reference numbers shown in this leaflet when

requesting spare or replacement parts.

To keep your bed in pristine condition, occasionally,

wipe over with a slightly dampened, clean cloth.

Intersecting

Hole

Page 2 of 4

Description

Sleeve Nut (M6x1mm)

Flat Washer (6mm)

Allen Key (4mm)

Bolt (M8x75mm)

Centre Support Leg

When they are supplied and are part

of the assembly of this bed, ensure

that barrel nuts are fitted the correct

way so the hole is facing towards the

intersecting hole.

We recommend the bed is

assembled in the room it will

be located in.

Qty