ATIM ACW-SF8 Installation Manual - Page 5

Browse online or download pdf Installation Manual for Radio Modems ATIM ACW-SF8. ATIM ACW-SF8 10 pages. Atim cloud wireless - metering 2 digital inputs – 1 wirecut input

Print Page

CONFIGURATION

Configuration can be performed locally, using the internal switches, or remotely, by sending

downlink frames. By default, the product uses the configuration indicated by the switches if no

configuration has been specified via downlink frames.

If a configuration has been applied via downlink, it will be used the next time the device restarts.

a. Configuration with internal DIP switches:

The configuration is read at start-up. The table below lists the different modes of operation that

can be configured.

Meter mode: periodic sampling of values from both meter inputs (even if only one input is used) and

regular transmission of the data.

Digital mode: The state of both inputs is transmitted if either of their states change.

ELEC mode: Periodic sampling of meter 1 every X minute, with one transmission for every 6

readings.

ACW-MR2_QIG_FR_V2.5

- Complete technical manual available at www.atim.com -