DREAMS SAPPORO LIFESTYLE SLEEPMOTION 200i Assembly Instructions Manual - Page 4

Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing DREAMS SAPPORO LIFESTYLE SLEEPMOTION 200i. DREAMS SAPPORO LIFESTYLE SLEEPMOTION 200i 18 pages. Audio tv bed

Print Page

TV Installation Kit packed inside the accessory box in the footboard, Pack 2

(h) choose a pair of suitable bolt sets

Bolt set

Counter-sunk screw

M8 x 25mm

Tools required

Please check you have all these below

Tape measure

Important:

In the room where bed is to be used, first prepare the electric bed base by fitting the eight

longer 6' ' (15cm) legs, as in Step 2. Connect the power and check the operation then step by step

follow the bed assembly instructions below, to build the bedstead around the electric bed base.

Please read Step 8 carefully, before fitting the television.

Fitting the brackets for the side rails

On the headboard & footboard screw in the bolt

sets (a, b & c) leaving a 10mm gap as shown then

hook on the brackets (D, E & F).

Tighten all x12 bolts 90% using Allen key (d).

Counter-sunk screw

set (M6x12mm)

set (M4x12mm)

Before starting assembly please refer to the owners manual supplied with

your Sleepmotion 200i bed base and follow the instructions taking note of

any safety precautions or operational safety requirements of the installation.

Sapporo Sleepmotion Lifestyle TV Bed - Assembly guide - Page 4

(j) choose a suitable Allen key

Allen key (2.5mm)

10mm

k x2

Allen key (4mm)

TV Support Slide

x12