ANDILOG CENTOR FIRST II User Manual - Page 10
Browse online or download pdf User Manual for Measuring Instruments ANDILOG CENTOR FIRST II. ANDILOG CENTOR FIRST II 12 pages.
Print Page
The number of decimal points displayed changes according to the unit chosen.
3.3.3. Change the display order
The force gauge detects and stores the maximum in tension and compression. Press the key
. The display order of the different values will shift upwards. The top line will then move to the
bottom. Each press of this key changes the display. The Centor First II remembers the display order
when it is turned off.
3.3.4. Auto-off
The automatic shutdown saves the battery charge. The force gauge is automatically switched off
after 15 minutes without pressing any key.
3.3.5. Maintenance screen
A long press on the U button displays a maintenance screen. This screen provides information about
the sensor and its status.
Sensor capacity
Maximum force that has been
applied to the sensor beyond
the capacity
Number of times the sensor has
been overloaded
Factory settings of the sensor
0 offset of the sensor
- 10 -
User's manual
CENTOR FIRST II