Andis BGC User Manual

Browse online or download pdf User Manual for Hair Clipper Andis BGC. Andis BGC 2 pages. Andis model bgc clippers
Also for Andis BGC: Use And Care (2 pages)

Print Page

CHANGING THE BLADE DRIVE ASSEMBLY

If your clipper blades no longer cut properly (be

sure to try more than one blade, since the blade

currently being used may be dull), it could be that

your blade drive assembly needs replacement.

To change the blade drive assembly:

1. Remove blade set (Diagram G).

2. Remove drive cap (Diagram H).

DIAGRAM G

DIAGRAM H

3. Remove blade drive mounting screws

(Diagram I).

4. NOTE: Before removing blade drive assembly,

note the way it is positioned (this will help you in

reassembly). Remove blade drive assembly

(Diagram J).

BLADE

DRIVE

MOUNTING

SCREWS

DIAGRAM I

DIAGRAM J

5. Drive bearing should be at its lowest position, if

not, move it with your finger to lowest position

(Diagrams K & L).

INCORRECT

CORRECT

POSITION

OF DRIVE

BEARING

DRIVE

BEARING

DIAGRAM K

DIAGRAM L

6. Put on new drive assembly, align screw holes

and press down (Diagram J).

7. Reassemble blade drive by mounting screws

(Diagram I).

8. Replace drive cap (Diagram H).

9. Replace blade (Diagram M).

DIAGRAM H

DIAGRAM M

FACTORY REPAIR SERVICE

When the blades of your Andis Clipper become dull

after repeated use, it is advised to send your blades

to an Andis Authorized Service Station mentioned

above for resharpening. If you wish your clipper to be

serviced as well, they should be carefully packed

and mailed either Parcel Post Insured, or U.P.S.

LIMITED WARRANTY

This Andis product is warranted against defective material or workmanship for one year from the

date of purchase. All implied warranties arising and by virtue of State law shall also be limited to

one year. Any Andis product determined to be defective in material or workmanship during the

warranty period will be repaired or replaced without cost to consumer for parts and labor. The

defective product must be returned with proof of purchase and $6.50 to cover cost of handling,

to any Authorized Andis Repair Station or to: Andis, 1800 Renaissance Blvd., Sturtevant, WI 53177

U.S.A. or IN CANADA to: A & AG AGENCIES (CANADA), INC. 10050 Côte de Liesse, Lachine,

Québec, H8T 1A3 CANADA. Enclose or attach a letter describing the nature of the problem. Due

to foreign matter sometimes found in hair, clipper blades or resharpening of blades are not sub-

ject to the one year warranty. The blade set has a 10 Day Limited Warranty. If the blade set fails

to cut, it will be resharpened free of charge if returned within 10 days of purchase. Send your

blade set postage prepaid with the original purchase receipt to: ANDIS COMPANY, ATTENTION:

Service Department, 1800 Renaissance Blvd., Sturtevant, WI 53177 U.S.A. (U.S. & Canada only).

Andis will not be liable under this warranty for any defect, failure or malfunction of any of its

products cause by normal wear, abuse, misuse, unauthorized adjustments or disassembling.

Andis will not be liable for any consequential damages resulting from any defect in material or

workmanship of any of its products. Some States do not allow limitations on how long an

implied warranty lasts or exclusion or limitation of incidental or consequential damages, so the

above limitations or exclusions may not apply to you. The Warranty gives you specific legal

rights, and you may also have other rights which may vary from State to State.

Date

Purchased______________________________________

Model____________________________

ANDIS AUTHORIZED

REPAIR

SERVICE STATIONS

Please refer to the service stations listing

on web site for most up-to-date

Listings !

Thanks

KEEP THIS FOR YOUR RECORDS

Form # 22311 Rev. A

MODEL BGC

Andis

Model BG

Detachable Blades

are compatible with Oster

Models 76, 10 & 111

Congratulations –

You just went First Class

when you bought this Andis Clipper.

Careful workmanship and quality design

have been the hallmarks of Andis products

since 1922.

Printed in U.S.A.

Clipper