Caroma G16006E6A Installation And Maintenance Instructions Manual - Page 3
Browse online or download pdf Installation And Maintenance Instructions Manual for Kitchen & Bath Fixtures Caroma G16006E6A. Caroma G16006E6A 16 pages. E hands free basin mixer/tap
Print Page
I M PO R T ANT
PrESSurE & TEMPEraTurE rEquirEMEnTS
1.
Hot and cold water inlet pressures should be equal.
2.
Static inlet pressure range 150-800 kPa - new Regulation 500 kPa maximum
static pressure at any outlet within a building (Ref. aS/nZS 3500.1-2003, clause
3.3.4)
3.
Maximum hot water temperature: 70°c
DEck rEquirEMEnTS
1.
deck thickness: 35mm maximum
2.
tap body hole (in deck): Ø34-Ø36mm
PowEr rEquirEMEnTS
Mains operation: 240V 50Hz 3 pin socket with Battery Backup (dual Power Input Box)
Battery operation: IP67 dual Power Input Box (9V battery not included)
iMPorTanT inForMaTion
1.
not suitable for gravity feed systems
2.
tapware is fitted with a flow regulated aerator insert. this low flow rate may
not be suitable for connection to some instantaneous Gas Water Heaters, some
tempering Valves, some Solar Water Heaters & some thermostatic Mixing
Valves. check with the manufacturers of these products.
3.
Isolating stop taps must be fitted to the hot & cold water supply connections.
(Part no. 842018c - Mini cistern 1/4t)
4.
all pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
5.
do not install facing a mirror or any other electronic system operated by an
infrared sensor.
6.
to prevent reflection problems, it is recommended to keep a minimum distance
of 1.50 meters between the mixer or tap and any other objects.
7.
Flexible tails have a left hand thread connection to tap/mixer body. Rotate
clockwise to remove.
TEcHnical DaTa
1.
Preset sensor range: 220mm (adjustable)
2.
Minimum sensor range: 80mm
3.
Maximum sensor range: 220mm
4.
Security time: 90 seconds (adjustable)
3