Caroma G Series Installation And Maintenance Manual - Page 6
Browse online or download pdf Installation And Maintenance Manual for Dispenser Caroma G Series. Caroma G Series 16 pages. Electronic soap dispenser
Also for Caroma G Series: Installation And Maintenance Instructions Manual (16 pages), Installation And Maintenance Instructions Manual (16 pages), Installation And Maintenance Manual (17 pages)
Print Page
INSTALLATION
INSTALLING THE SOAP DISPENSER
Cut an adequate opening in the wall for
the dimensions of the soap dispenser
base (where you want to install the
spout) and the corrugated tube.
1
Disconnect the soap dispenser body with
the rosette from the base by unscrewing
the set screw.
Mount the soap dispenser base into the
opening in the wall and secure it using
the two anchors provided in the package.
Important: The soap dispenser base
2
should be installed so that the outside
surface of the finished wall falls between
the minimum and maximum lines marked
at the base.
Assemble the temporary protective soap
3
dispenser base cover.
Assemble the corrugated tube to the
soap dispenser base and make sure it
4
stays outside the wall when you do the
tiling.
4
SET SCREW
MIN MAX