Comnet CLFE IPS Series Installation And Operation Manual - Page 5

Browse online or download pdf Installation And Operation Manual for Switch Comnet CLFE IPS Series. Comnet CLFE IPS Series 19 pages. High-power poe mid-span injector

Print Page
Comnet CLFE IPS Series Installation And Operation Manual
INSTALLATION AND OPERATION MANUAL

User Input

Firmware File: Enter the firmware filename needs to be used. This is the firmware that will run inside the Midspan
for its operation. A new unit has all the necessary programing and does not need this step.
Status
Command
Progress:
This bar will display the progress of commands.
Commands
Browse:
The File browse dialog box will be opened to select the firmware file to be used.
Download:
The image file selected using "Load" command will be used for download. Needs to be used when
the PoE system is in BOOTROM mode.
Save Image:
Downloaded image will be saved in the EEPROM for auto-booting (Booting with out intervention of
the host).
Save Config:
Saves the current running configuration in the EEPROM.
Tech SupporT: 1.888.678.9427
Figure 6: Firmware Window
CLFE(X)IPS
INS_CLFE(X)IPS_REV–
12/15/11
PAGE 5