Comnet CNFE2MCPOEM Installation And Operation Manual - Page 6
Browse online or download pdf Installation And Operation Manual for Media Converter Comnet CNFE2MCPOEM. Comnet CNFE2MCPOEM 6 pages. 10/100 mbps 2 port media converter with power over ethernet
Print Page
INSTALLATION AND OPERATION MANUAL
INSTALLATION CONSIDERATIONS
Th CNFE2MCPOE is supplied as a Rack Mount/Surface mount module. In the ComNet Rack, PoE operation is not supported. The CNFE2MCPOEM is
supplied as a Surface mount module. Units should be installed in dry locations protected from extremes of temperature and humidity.
WARNING: Unit is to be used with a Listed Class 2 power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than
room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (T
specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
FIGURE A
Dimensions are for a standard ComNet
© 2013 Communications Networks Corporation. All Rights Reserved. "ComNet" and the "ComNet Logo" are registered trademarks of Communication Networks, LLC.
TECH SUPPORT: 1.888.678.9427
one slot module
™
.156 [3.96 mm]
.313 [7.95 mm]
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
FIGURE B
Dimensions are for a small size ComNet
CNFE2MCPOE[/M]
)
ma
surface mount module
™
INS_CNFE2MCPOE[/M]_REV–
07/28/10
PAGE 6