Comnet CLFE4UTP Installation And Operation Manual

Browse online or download pdf Installation And Operation Manual for Extender Comnet CLFE4UTP. Comnet CLFE4UTP 9 pages. Ethernet-over-utp/twisted pair extender with pass-through poe

Print Page

Important Safety Warning:

Read and keep these directions

heed all warnings

Follow all instructions

do not use this apparatus near water

Clean only with a dry cloth

Install in accordance with the manufacturer's

instructions

This installation should be made by a qualified

service person and should conform to all local codes

See further safety instructions on Page 8

INSTALLATION AND OPERATION MANUAL

CLFE(X)UTP

EThERNET-oVER-UTP/TwISTEd PAIR EXTENdER

wITh PASS-ThRoUGh PoE

The ComNet

CopperLine® CLFE(X)UTP Ethernet over UTP line consists of four

™

models that support 100Mbps Ethernet as well as Pass-through Power over Ethernet

(PoE) over twisted pair cable (CAT5, UTP). These models support transmission

distances of up to 3,000 feet (914m) at 10 Mbps, or 2,100 feet (640m) at 100 Mbps.

The CLFE1UTP, the CLFE4UTP, CLFE8UTP and the CLFE16UTP transport, one, four,

eight or sixteen channels respectively. The IEEE 802.3-compliant Ethernet electrical

interface of these Ethernet extenders also meets the requirements for IEEE 802.3af

PoE power, passing-through up to 30 watts of power per port to the powered device

(Pd). The CLFE(X)UTP series may also be used interchangeably with other CopperLine

Ethernet-over-UTP extenders.

Environmentally hardened to the requirements of NEMA TS-1/ TS-2 for most out-of-

plant applications, and true plug-and-play design ensures ease of installation and

operation.

LEd indicators are provided for rapidly ascertaining the operating status of the

device. See Figures 6 – 8 on Page 7 for LEd explanations.

Packaged in a rugged aluminum housing, these units are designed for desktop or stand-

alone mounting. The CLFE8UTP and CLFE16UTP are offered in EIA 19" 1U high rack for

easy installation. See Figures A through C on Page 8 for mounting instructions.

See Figures 1 – 8 for complete installation details.

INS_CLFEXUTP_REV–

09/28/11

PAGE 1