ATK 250LQ 1995 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Motorcycle ATK 250LQ 1995. ATK 250LQ 1995 18 pages.

Print Page

adjustment of the brake's engagement

point. It should be adjusted to the

rider's preference.

Throttle:

The throttle should have a small

amount of freeplay in it. The adjust

ment is located under the rubber cover

between the throttle assembly and

throttle cable.

Rear brake pedal:

The rear brake pedal can be adjusted

by loosening the locknut on the top of

the clevis and then turning the master

cylinder push shaft in or out. After

adjusting, be sure the clevis locknut is

retightened and there is a slight

amount of freeplay in the brake pedal

prior to the push shaft being moved.

Handlebar adjustment:

The Protaper handlebar can be adjust

ed for height and reach. To lower the

handlebar, loosen the four handlebar

clamp bolts, then rotate the bar reward

to lower its height and decrease the

reach. Rotate the bar forward to raise

its height and increase its reach. A

scale printed on the top-center section

of the handlebar provides a reference

for adjustment. After adjusting the

handlebar position, retighten the han

dlebar clamps, starting with the front

bolts followed by the rear bolts.

ATK 1995 Owner's Manual