Bosch 8-2-LI Professional Original Instructions Manual - Page 7
Browse online or download pdf Original Instructions Manual for Drill Bosch 8-2-LI Professional. Bosch 8-2-LI Professional 9 pages.
Also for Bosch 8-2-LI Professional: Original Instructions Manual (12 pages)
Print Page
OBJ_BUCH-970-004.book Page 13 Thursday, November 29, 2012 10:47 AM
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e.g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button*
5 Battery pack*
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Universal bit holder*
12 Screwdriver bit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. drilling dia.
– Steel
– Wood
*Value dependent of the battery pack being used
Bosch Power Tools
Cordless Drill/Driver
Max. screw dia.
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
*Value dependent of the battery pack being used
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Drilling into metal: a
Screwdriving: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
GSR 10,8-2-LI
Technical file (2006/42/EC) at:
3 601 H68 1..
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
V=
10.8
Dr. Egbert Schneider
Senior Vice President
-1
min
0 – 350
Engineering
-1
min
0 – 1300
Nm
30/15*
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
mm
10
16.11.2012
mm
19
English | 13
GSR 10,8-2-LI
mm
mm
kg
(triax vector sum) and uncertainty K
h
2
2
<2.5 m/s
, K =1.5 m/s
,
h
2
2
<2.5 m/s
, K =1.5 m/s
.
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 00G | (29.11.12)
7
1.0 – 10
0.95