Drehmo i-matic Instruction Manual - Page 16
Browse online or download pdf Instruction Manual for Adapter Drehmo i-matic. Drehmo i-matic 20 pages. Electrical actuator with integral controls
Also for Drehmo i-matic: Installation And Operating Manual (18 pages)
Print Page- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.3 SER03 adaptor
The SER03 adaptor enables the serial access by means of a 2x6 pole male pin connector
matching on a corresponding 2x6 pole female socket connector in 2,54mm pitch.
Reverse polarity protection is not given by the design. The detection of the correct
polarity is only possible by means of the matching labeling J8, J9, X6 which can be
found on the adaptor as well as on the base board print.
A mismatch of polarity may result in a defect of the adaptor and the base plate!
DREHMO
Instruction manual for USB adaptor kit
page 16 of 20