Electrolux 98030KF-SN User Manual - Page 17

Browse online or download pdf User Manual for Hob Electrolux 98030KF-SN. Electrolux 98030KF-SN 20 pages. Ceramic glass induction hob

Print Page

WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing correctly.

• The appliance must be connected to the electrical supply by a qualified electrician.

• Loose and inappropriate plug and socket connections can make the terminal overheat.

• Have the clamping connections correctly installed by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropriate mains cable of

type H05BB-F Tmax 90°C (or higher) must be used.

• If this appliance's mains cable is damaged, it must be replaced by a special cable (type

H05BB-F Tmax 90°C; or higher). Please contact your local Service Force Center for further

advice.

A device must be provided in the electrical installation which allows the appliance to be

disconnected from the mains at all poles with a contact opening width of at least 3 mm

Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to

be removed from the holder), earth leakage trips and contactors.

Sticking on the seal

• Clean the worktop in the area of the cut-out section.

• Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge

of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch

it. The cut ends should lie in the middle of one side. When you have cut it to length (add

a few mm), press the two ends flush up against one another.

Assembly

Safety information

min. 500

min. 5

min.