ATL Berkshire 100 User Manual - Page 3

Browse online or download pdf User Manual for Telephone ATL Berkshire 100. ATL Berkshire 100 4 pages.
Also for ATL Berkshire 100: User Manual (4 pages)

Print Page

HANDSET VOLUME KEY

The handset volume on your Berkshire 100 can be

increased by a ﬁ xed level by pressing the 'VOLUME'

button. This is particularly useful on a poor line, or

if a caller has a quiet voice. To return to normal

volume, press the 'VOLUME' button a second time.

Note: The handset volume is NOT set back to the

lower level when the handset is replaced.

RINGER VOLUME AND PITCH

The ringer volume and pitch are selected via the

keypad using the following sequence:

HEARING AID COMPATIBILITY

For hearing aid users, an inductive coupler has

been installed in the handset of the Berkshire 100,

to improve audible efﬁ ciency.

Help

If the telephone appears to be faulty when ﬁ rst

connected, a few simple checks may help to identify

some possible problems, as listed below:

NO DIAL TONE

•

Check that the telephone plug is fully inserted in

the socket.

•

If it is, try connecting the telephone into another

socket, if available. If dial tone is now heard, the

original socket is faulty.

•

Alternatively, try connecting another telephone

into your socket. If this telephone gives dial tone,

then your new telephone is probably faulty.

ALL OPERATIONS SEEM SATISFACTORY

EXCEPT THE TRANSFER BUTTON

•

Change the recall selector switch setting (T/E).

If the transfer operation is now satisfactory, the

problem is resolved.

ALL OPERATIONS SEEM SATISFACTORY

EXCEPT THE VOLUME BUTTON

•

Disconnect the linecord from the telephone socket

for at least 10 minutes.

•

Re-connect the linecord to the telephone socket.

Ensure that you raise and replace the handset

within 1 minute of re-connecting the line cord to

the telephone socket.

For help with call divert and call pickup please

contact your Telecom Team/Provider as this will

vary depending upon what switchboard you are

connected to.

Further concerns may also be addressed by

calling our Technical Support Department

on 0845 421 0730 or visiting our website,