Electrolux EGS6414W User Manual - Page 14

Browse online or download pdf User Manual for Hob Electrolux EGS6414W. Electrolux EGS6414W 20 pages.
Also for Electrolux EGS6414W: User Manual (20 pages)

Print Page

www.electrolux.com

• To remove burnt food, fat and

stubborn stains let them soak in a

small amount of mild detergent for a

few minutes before cleaning.

• Use cleaning products designed

specifically for cleaning stainless steel

in order to protect the steel surfaces.

• Do not use cleaning products

containing corrosive chemicals such

as chlorides, do not clean the surface

with disinfectants, stain or rust

removers and immersion cleaners.

7.2 Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when

you replace the pan

supports to prevent the

hob top from damage.

2. The enamel coating occasionally can

have rough edges, so be careful

when you wash the pan supports by

hand and dry them. If necessary,

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem

There is no spark when

you try to activate the

spark generator.

supports are aligned with the centre

of the burner.

7.3 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and a non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• To clean the enamelled parts, caps

and crowns, wash them with warm

soapy water and dry them carefully

before you put them back on.

7.4 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

7.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and the

pressure adjuster, if fitted.

Possible cause

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Remedy

Check if the hob is correct‐

ly connected to the electri‐

cal supply.