Andon KD-5904 Operation Manual - Page 11

Browse online or download pdf Operation Manual for Blood Pressure Monitor Andon KD-5904. Andon KD-5904 19 pages.

Print Page

DN:KD-5904-SMSY01 V3.0

c. The monitor will pump up the cuff; then release the air pressure from the cuff; then

show the measurement on the LCD display. If the voice feature is activated, it will

announce the blood pressure, heart pulse rate measurements and irregular

heartbeat (if any) and it will state the classification of the measurements according

to the standards of the World Health Organization (WHO)

d. The monitor power will turn-off automatically after 1 minute of non-use.

Alternatively, you can press and hold the button "START" to manually turn off the

monitor.

Note: Please

consult a health care professional for interpretation of pressure measurements.

9. DISPLAYING STORED RESULTS

a. When the monitor is turned off (the time and date remain displayed), press and

release the button "MEM". The LCD display will show the number of measurements

in the memory; then the average of the last three measurements will be displayed.

After few seconds, the most recent measurement will be displayed. If more than one

measurement is in the memory, press and release the button "MEM" again and the

second most recent measurement will be displayed. Repeat this process to view each

measurement stored in the memory.

If the voice function is on, the voice will announce each measurement and irregular

heartbeat (if any) in the memory when the measurement is shown on the LCD display.

The voice will also state how each measurement is classified according to WHO

(World Health Organization).

After reading the measurements in the memory, press and release the button "MEM"

when display the last memory or press and release the button "START", the monitor

will power off. When in the memory reading mode, the monitor will power-off

automatically after 1 minutes of non-use.

11/19

Operation Guide

JS-KD5904-03-V2.0