Andon KD-5917 Operation Manual - Page 6

Browse online or download pdf Operation Manual for Blood Pressure Monitor Andon KD-5917. Andon KD-5917 15 pages.

Print Page

DN:KD-5917-SMSY01 V3.0

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help.

18. This blood pressure monitor is verified by auscultatory method. It is recommended that

you check annex B of ANSI/AAMI SP-10:2002+A1:2003+A2:2006 for details of verification

method if you need.

SETUP AND OPERATING PROCEDURES

a. Open battery cover at the back of the monitor.

b. Load four "AA" size batteries. Please pay attention to polarity.

c. Close the battery cover.

When LCD shows battery symbol

with new ones.

Rechargeable batteries are not suitable for this monitor.

Remove the batteries if the monitor will not be used for a month

or more to avoid relevant damage of battery leakage.

Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately

rinse with plenty of clean water and contact a physician.

The monitor, the batteries and the cuff, must be disposed of according to local

regulations at the end of their usage.

a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and

LCD will display time and date.

b. While the monitor is in Clock Mode, press the "START" and "MEM" button

simultaneously for two seconds, the month will blink at first. Press the button

"START" repeatedly, the day, hour and minute will blink in turn. While the number

is blinking, press the button "MEM" to increase the number. Keep on pressing the

button "MEM", the number will increase fast.

, replace all batteries

6/15

Operation Guide

Template version:1