Electrolux EHE 688 W Instruction Booklet - Page 14

Browse online or download pdf Instruction Booklet for Hob Electrolux EHE 688 W. Electrolux EHE 688 W 16 pages. Electric hob
Also for Electrolux EHE 688 W: Instruction Booklet (16 pages), Instruction Booklet (16 pages)

Print Page

Building over a kitchen unit with door

Proper arrangements must be taken in designing the

furniture unit, in order to avoid any contact with the

bottom of the hob which can be hot when in

operation. The recommended solution is shown in

diagram 3.

The panel fitted under the hob ("a") should be easily

removable to allow easy access if technical assistance

is needed. The space behind the kitchen unit ("b") can

be used for connections.

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive

sealing gasket supplied with the hob must be fitted to

the edge of the cut out. It is essential that no gaps are

left in this seal in order to prevent spillage near the

hob seeping into the cabinet below.

1) Place the sealing gasket all around the edge

of the cut out.

2) Place the hob into the cut out and secure it by

means of the relevant fixing clamps and

screws, as shown in the diagram.

FO 1013

Dimensions are given in mm.

FO 0402

a) Sealing gasket