Dremel MS20 Operating/Safety Instructions Manual - Page 12

Browse online or download pdf Operating/Safety Instructions Manual for Saw Dremel MS20. Dremel MS20 20 pages.

Print Page

Find Quality Products Online at:

Installing Fence / Miter Gauge

(Optional Accessory)

Your Moto-Saw can use a combination fence

and miter gauge.

For use as a miter gauge:

1. To use the miter gauge slide the metal T

section into the track in the surface of the

saw station, Fig. 12.

2. Twist the knob on the miter gauge to

adjust the angle of the miter gauge and

tighten at the desired angle, Fig. 13.

For use as a fence:

1. Install the miter gauge as described

above.

2. Adjust the miter angle to 90° then slide the

miter gauge to the desired fence position,

Fig. 14.

3. Rotate the blue lever on the side of the

saw station forward to lock.

To remove, reverse procedure.

GlobalTestSupply

www.

FIG. 12

FIG. 13

FIG. 14

.com