Bosch GGS 6 Professional Original Instructions Manual - Page 8
Browse online or download pdf Original Instructions Manual for Drill Bosch GGS 6 Professional. Bosch GGS 6 Professional 18 pages.
Print Page
OBJ_BUCH-1050-005.book Page 16 Friday, March 21, 2014 9:30 AM
16 | English
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
Technical Data
Straight grinder
Article number
Rated power input
Output power
Max. speed
Thread of grinder spindle
Max. spindle length
Tool holder
Max. grinding disc thickness
Grinding tool diameter, max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.36 ohm.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Helmut Heinzelmann
Executive Vice President
Head of Product Certification
Engineering
PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
25.02.2014
Assembly
Before any work on the machine itself, pull the mains
plug.
3 609 929 C82 | (21.3.14)
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
GGS 6
0 601 214 0..
W
1200
W
720
-1
min
6800
5/8"
mm
27
mm
16
mm
25
mm
125
kg
3.9
/II
Mounting the Protective Devices
Adjust protection guards in such a manner that spark-
ing toward the operator is prevented.
Protection Guard for Grinding (GGS 6 S) (see figure A)
Place the protection guard 2 on the spindle collar. Adapt the
position of the protection guard 2 to the requirements of the
work step. Lock the protection guard 2 with locking screw 14
and tighten the locking screw with at least 10 Nm.
Protection Guard for Grinding (GGS 6) (see figure E)
Place the protection guard 11 on the spindle collar. Adapt the
position of the protection guard 11 to the requirements of the
work step. Lock the protection guard 11 with the two locking
nuts 19 and tighten the locking nuts with at least 10 Nm.
After mounting the grinding tool, shut the protection guard 11
and tighten both wing nuts.
Mounting the Grinding Tools
The grinding tools must run completely concentrically. Do not
continue to use damaged grinding tools that are out of bal-
ance. If the grinding tools are out of balance they should be re-
placed. Treat with a whetstone (accessory) or change.
Using a whetstone, any particular special shape can be pro-
duced out of the basic forms of the grinding accessory.
When using grinding tools with a threaded insert, pay atten-
tion that the end of the grinder spindle 3 does not touch the
hole base of the grinding tool.
GGS 6 S
0 601 214 1..
1150
670
6800
M 14
31
20
32
125
3.9
/II
Bosch Power Tools