Compac Master MR80S Installation And Setup Instructions - Page 7

Browse online or download pdf Installation And Setup Instructions for Dispenser Compac Master MR80S. Compac Master MR80S 17 pages.

Print Page

Gilbarco Pump comms Setting

6.2
(Special software and interface board required)
1-OFF
2-ON
3-OFF
4-ON

Triac Dip-switches

7.
Important note:
Great care should be taken not to accidentally change the setting of these switches while
working in the Flame-proof box. Operating the unit with these incorrectly set can result in
damage to the C4000 Power Supply or incorrect operation of the triacs.
These switches are set in the factory and should not be changed.
If they are accidentally changed these are the correct settings for Master / Premier Dispenser
applications.Note: They are 3 position switches
SW1
SW2
SW4
\\Cilaklfs1\shrdata\Masters\Installation Sheets\Master & Premier\MR40S MR80S Installation
Dispenser (low current output)
2
2
2
Sheet.doc
Page 7 of 17