Electrolux LIT60342 User Manual - Page 12

Browse online or download pdf User Manual for Hob Electrolux LIT60342. Electrolux LIT60342 20 pages.
Also for Electrolux LIT60342: User Manual (20 pages)

Electrolux LIT60342 User Manual
12
www.electrolux.com
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
5.10 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob. Touch
seconds. The display comes on and
goes out. Touch
comes on. Touch
choose one of the following:
- the sounds are off
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
. Do not set the heat setting.
for 4 seconds.
comes on.
.
. Do not set the heat setting.
for 4 seconds.
comes on.
.
for 4 seconds.
the function
for 3 seconds.
of the timer to
5.11 Power management
.
• All cooking zones are connected to
one phase. See the illustration.
• The phase has a maximum electricity
loading of 7350 W.
• The function divides the power
between cooking zones.
• The function activates when the total
electricity loading of the cooking
zones exceeds 7350 W.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones alternates between the
chosen heat setting and the reduced
heat setting. After some time the heat
setting display of the reduced zones
stays on the reduced heat setting.
.
5.12 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
for 3
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
or
basis of mode setting and temperature of
the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
you can
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
hood user manual.