Atlantic RMG2-T1 S Installation And Operating Manual - Page 16
Browse online or download pdf Installation And Operating Manual for Heater Atlantic RMG2-T1 S. Atlantic RMG2-T1 S 18 pages. Inertia radiator / cast iron heating element
Print Page
8- Ventilation Functions
To prevent wasting energy the device must be correctly setup when ventilating rooms. Your device has a direct
access button to facilitate this procedure.
What you want to do
Activate the Ventilation
function
Deactivate the Ventilation
function
9 - Control Lock
In order to prevent accidental changes to the controls, we suggest you lock them.
What you want to do
Lock access to the controls
Deactivate the lock
10 - If You Have a Load Shedding Device
Choose a load shedding device with a pilot wire or carrier current to cut-off heating devices (based on your
contract with your electricity provider). Indeed, a power output load shedding device may damage the devices'
thermostat.
During these periods, your device displays «Load shedding.» It then returns to its initial operating mode.
11 - Factory Reset
Your device may be reset to factory conditions: - push and hold simultaneously
12 - Maintenance
Before beginning maintenance, turn off the device by pressing and holding the key
To maintain your radiator's performance, approximately twice a year you must dust the lower and upper grilles
on the device with a vacuum or brush.
The device may be cleaned with a damp cloth; never use abrasive agents or solvents.
In polluted atmosphere, smudges may appear on the device's grilles. This is related to poor air quality. In this
case, it is advisable to check correct ventilation in the room (ventilation, air intake, etc.) and air quality. These
smudges do not qualify for guarantee replacement.
13 - Troubleshooting
Problem Encountered
The radiator does not heat
The radiator heats all the time
What you need to do so
Before opening the window, press the
key.
Close the window, press the
key.
What you need to do so
Press and hold the
key.
Press and hold the
key.
If you are running a schedule, check that the scheduler is in COMFORT
mode.
Check that the installation circuit breakers are not tripped and that the
load shedding device (if you have one) has not cut off the radiator's
power supply (see part 10). Check the air temperature in the room: if it
is too high the heating pictogram is not displayed: The radiator does not
heat.
Check that the radiator is not in a draft or that the temperature settings
have not been changed.
What will happen
The
icon is displayed on the
screen as well as the Freeze Protec-
tion mode.
The
icon disappears.
The current mode and the chosen
temperature are displayed
What will happen
The
icon is displayed.
The
icon is no longer displayed.
OK
,
and
équilibre
OK
.
Perform Check
.