AirTech UT150B Installation And Wiring Instructions

Browse online or download pdf Installation And Wiring Instructions for Water Pump AirTech UT150B. AirTech UT150B 4 pages.

Print Page

UT150SC/B

Installation and Wiring Instructions

SAFETY AND GUIDANCE NOTES

All wiring to be in accordance with the current I.E.E.

Regulations, or the appropriate standards of your country and

MUST be installed by a suitably qualified person.

The Fan should be provided with a local isolator switch

capable of disconnecting all poles, having a contact

separation of at least 3mm.

Ensure that the mains supply (Voltage, Frequency, and

Phase) complies with the rating label.

The Fan should only be used in conjunction with the

appropriate Airtech products.

The fan should only be used in conjunction with fixed wiring.

When the Fan is used to remove air from a room containing a

fuel-burning appliance, ensure that the air replacement is

adequate for both the fan and the fuel-burning appliance.

The Fan should not be used where it is liable to be subject to

direct water spray for prolonged periods of time.

Where ducted Fans are used to handle moisture-laden air, a

condensation trap should be fitted. Horizontal ducts should be

arranged to slope slightly downwards away from the Fan.

This appliance is not intended for use by persons (including

children)

with

capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

Young children should be supervised to ensure that they do

not play with the appliance.

This product should not be disposed of with household waste. Please recycle where facilities exist. Check with

your local authority for recycling advice.

reduced

physical,

IP65

sensory

mental