Electrolux 316488521 Installation, Use & Care Manual - Page 18

Browse online or download pdf Installation, Use & Care Manual for Ventilation Hood Electrolux 316488521. Electrolux 316488521 19 pages. 30” and 36” free-standing range hood

Print Page

Electrolux 316488521 Installation, Use & Care Manual

1. Filters

Care and cleaning

Cleaning

• Always use the mildest cleaner that will do the

job. Use clean, soft cloths, sponges or paper

towels.

• Rub stainless steel finishes in the direction of the

grain. Wipe area dry to avoid water marks.

• After cleaning, place all parts in their proper

positions before using.

The cleaners recommended below indicate a type

and do not constitute an endorsement. Use all

products according to package directions.

Hood Surface

Painted Surfaces: For general care, wipe the outside

Painted Surfaces:

of the hood with sudsy water or household cleaners

such as Fantastic or Formula 409, rinse well and dry

with a clean soft cloth to avoid water marks.

Stainless Steel Surfaces: Wipe and dry stainless

Stainless Steel Surfaces:

steel in the same direction as the grain. Avoid using

too much pressure, which may mar the surface. To

remove finger prints and give added shine, use

cleaners such as Stainless Steel Magic. Do not allow

any cleaning compounds to remain in contact with

stainless steel for extended periods.

Plastic surfaces: Wipe with a moist soapy sponge.

Plastic surfaces:

Rinse and dry.

Aluminum Mesh Filters: Clean filters in the dish-

washer or by agitating in sudsy water. Ensure that

there is no soil trapped in the fine mesh. Dry the

filters before reinstalling them.

Anodized Aluminum surfaces: Top cap is not remov-

Anodized Aluminum surfaces:

able. Wash top and underside with hot sudsy water.

Rinse and wipe dry or apply Fantastic® or Formula

409® first to a clean sponge or paper towel and

wipe clean. DO NOT USE powdered cleansers or

steel wool pads.