Electrolux 36" Ceramic Installation Instructions Manual - Page 8

Browse online or download pdf Installation Instructions Manual for Ventilation Hood Electrolux 36" Ceramic. Electrolux 36" Ceramic 25 pages. 30” and 36” free-standing range hood
Also for Electrolux 36" Ceramic: Use And Care Manual (26 pages), Installation Instructions Manual (7 pages), Installation, Use & Care Manual (22 pages), Installation Instructions Manual (8 pages)

Print Page

GAS COOKTOP INSTALLATION INSTRUCTIONS

5. Adjust the "LOW" Setting of the Dual Burner

(see Figure 8) on the Surface Burner Valve (Figure

10):

Note: On the dual valve the low setting of each portion

(rear portion of bridge burner and the center portion of

bridge burner) should be adjusted individually.

a. Push in and turn control to LITE until the rear portion

of the bridge burner ignites only.

b. Quickly turn knob to LOWEST POSITION.

c. If burner goes out, reset control to OFF.

d. Remove the surface burner control knob.

e. The inner portion of the dual burner flame size can be

increased or decreased by turning screw A (see Figure

19). Use screw B to adjust the flame size of the outer

portion of the dual burner. Turn counterclockwise

the screw to increase flame size. Turn clockwise the

screw to decrease flame size. Adjust flame until you

can quickly turn knob from LITE to LOWEST POSITION

without extinguishing the flame. Flame should be as

small as possible without going out.

Note: Air mixture adjustment is not required on surface

burners.

Figure 10

When All Hookups are Complete

Make sure all controls are left in the OFF position.

Before You Call for Service

Read the Before You Call for Service Checklist and

operating instructions in your Use and Care Guide.

It may save you time and expense. The list includes

common occurrences that are not the result of defective

workmanship or materials in this appliance.

Refer to your Use and Care Guide for Electrolux Service

phone numbers, or call 1-877-4ELECTROLUX (1-877-

435-3287).