Electrolux CHDI 8610 Operating And Installation Manual - Page 9

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Electrolux CHDI 8610. Electrolux CHDI 8610 24 pages. Cooker hood
Also for Electrolux CHDI 8610: Operating And Installation Instructions (20 pages)

Print Page

Maintenance and care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a mild deter-

gent.

• Never use corrosive, abrasive or flammable cleaning products.

• Never insert pointed objects in the motor's protective grid.

• Wash the outside surfaces using a delicate detergent solution.

Never use caustic detergents or abrasive brushes or powders.

• Only ever clean the switch panel and filter grille using a damp cloth

and delicate detergents.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.

Metal grease filter

• The purpose of the grease filters is to

absorb grease particles which form

during cooking and it must always be

used, either in the external extraction or

internal recycling function.

Attention: the metal grease filters must

be removed and washed, either by

hand or in the dishwasher, every four

weeks.

Removing the metal grease filter

• First, push the metal grease filter stop backwards, then extract the

filter, pulling downwards. Fig. 3.

Hand washing

• Soak grease filters for about one hour in hot water with a grease-

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when they are dry.

Dishwasher

• Place grease filters in the dishwasher. Select the most powerful

washing programme and highest temperature, at least 65°C. Repeat

the process. Refit the grease filters when they are dry.

When washing the metal grease filter in the dishwasher a slight

discolouration of the filter can occur, this does not have any impact

on its performance.

Fig. 3