Electrolux DAGL60 Operating Insructions - Page 7
Browse online or download pdf Operating Insructions for Ventilation Hood Electrolux DAGL60. Electrolux DAGL60 17 pages. Electrolux extractor hood
Before using for the first time
Special accessories
Regeneratable activated carbon filter:
The activated carbon filter must be regenerated before using the appliance for the first
time, as every activated carbon filter absorbs moisture. The moisture must be extracted.
Regeneration of the activated carbon filter:
Lay the filter cassette flat on the oven shelf in
the middle of your oven and heat it up for an
hour at 230 °C. Then allow the filter to cool
down completely for two hours. If the filter is
inserted to soon the extractor hood may be
damaged as a result of the residual heat of
the carbon. The regeneration process may
result in a normal discoloration of the filter.
Extractor hood controls
Always switch the extractor hood on before starting cooking.
Switching on
The fan is automatically switched on by
pulling out the extending hood. The fan
speed can be set by means of the position
of the extending hood (position 2-4).
Switching off
Push in the extending hood as far as it will
go. The fan and the light are switched off.
Light
Pull out the extending hood by a minimum of
1 cm and the light is switched on.
Position
1
Light
2
low
3
medium
4
high
The filter can then be placed in the extractor
hood again. Your appliance is now ready for
use.
There is a red highlighted sticker for the acti-
vated carbon filter, to help you to remember
to regenerate it every 2 months.
Tip: Stick it to the inside of the herbs and
spices cupboard door.
Types of cooking
--
Keeping food warm, poaching, simmering below boiling point
stewing, steaming, brazing, boiling
parboiling, searing, deep-frying
electrolux 7
Position 4
Position 3
Position 2
Position 1