Electrolux DFKTWC75GS Use & Care Manual - Page 12
Browse online or download pdf Use & Care Manual for Ventilation Hood Electrolux DFKTWC75GS. Electrolux DFKTWC75GS 20 pages. Electrolux vent hood use & care guide installation instructions
Print Page
12
Installation
Install the hood
NOTE
At least two people will be required to mount the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood with the wall-mounting bracket. Gently lower the hood
until it securely engages the bracket. Fig. 9.
3. Level the hood with (2) 3.9x9.5mm mounting screws and secure with (2) 4.8x38mm mounting screws. Use
drywall anchors provided if wall studs or framing are not available. Fig. 9.
4. Mount the electrical system plate attaching it with (3) 3.9x9.5mm mounting screws. Fig. 10.
5. On ducted hoods, attach 6" round metal duct between the hood's blower collar and duct that leads to the
outside location (Fig. 11).
6. On non-ducted hoods, attach 5" round metal expandable duct between the 5"- 6" adapter on the hood and
the connector on the plenum (Fig. 12).
7. Tape all duct joints to make them secure and air tight.
8. Plug the power cord into the electric wall receptacle. Tuck excess cord behind the flue.
MOUNTING SCREWS
(4.8x38mm)
6" ROUND
METAL DUCT
MOUNTING SCREWS
(3.9x9.5mm)
BLOWER COLLAR
MOUNTING SCREWS
(3.9x9.5mm)
WALL MOUNTING
BRACKET
MOUNTING SCREWS
(4.8x38mm)
RECTANGULAR
OPENING
FIG. 9
5" ROUND
METAL DUCT
FIG.11
PLATE OF THE
ELECTRICAL SYSTEM
FIG.10
PLENUM
5"-6"
ADAPTER
FIG.12