Electrolux DI 8610 Operating And Installation Instructions - Page 5

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Electrolux DI 8610. Electrolux DI 8610 20 pages. Cooker hood
Also for Electrolux DI 8610: Operating And Installation Manual (24 pages)

Print Page

Description of the Appliance

• The hood is supplied as an extractor unit and can also be used with a filtering function

by fitting one charcoal filter (special accessory).

• You will need an original AEG charcoal filter for this function (Available from your local

AEG Service Force Centre).

Extractor version

• The air is discharged to the outside through a

pipe, which must be fitted to connection flange

A. Fig. 1.

• In order to obtain the best performance the

hose should have a diameter equal to the outlet

hole.

For the extractor version this pipe must have a

diameter of 150 mm.

Should there already be a pipe of diameter

125 mm that ducts to the outside through the

walls or roof, it is possible to use the 150/125

mm reduction flange provided. In this case the

hood will be slightly noisier.

Recirculation Version

• The air is filtered through an activated charcoal filter and returned to the kitchen

through the top grill of the outlet pipe.

• You will need an original AEG charcoal filter for the recirculation function. (Available

from your local Service Force Centre).

• Fix the deflector using 4 screws Ø 3.5x6.5 mm. Fig. 2.

Fig. 2

Fig. 1