Electrolux DI 8610 Operating And Installation Instructions - Page 9

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Electrolux DI 8610. Electrolux DI 8610 20 pages. Cooker hood
Also for Electrolux DI 8610: Operating And Installation Manual (24 pages)

Print Page

Charcoal filter

• The charcoal filter should only be used if you want to use the hood in the recirculation

function.

• To do this you will need an original AEG charcoal filter (available from your local

Service Force Centre).

• Cleaning/replacing the charcoal filter for UK

The charcoal filters cannot be cleaned, we recommend that they should be replaced

approximately every three months or more often if the hood is used for more than

three hours per day.

• Cleaning/replacing the carbon filter not for UK

Unlike other carbon filters, the LONGLIFE carbon filter can be cleaned and

reactivated. At normal use the filter should be cleaned every second month (when

using the hood 2,5 hours per day, in avarage). The best way to clean the filter is in

the dishwasher. Use normal detergent and choose the highest temperature (65º C).

Wash the filter separately so that no food parts gets stuck on the filter and later causes

bad odours. To reactivate the carbon, the filter should be dried in an oven for 10

minutes with a temperature of maximum 100º C.

After approximately three years of use, the carbon filter should be replaced with a

new, as the odour reduction capacity will be reduced.

• Fitting

Remove the frame i which supports the filter h by unscrewing it from the hood g

(Fig. 4). Insert the charcoal filter inside the frame and put all parts back in their place.

• To remove proceed in the reverse order.

• Always specify the hood model code number and serial number when ordering

replacement filters. This information is shown on the registration plate located on the

inside of the unit.

• The charcoal filter can be ordered from your local AEG Service Force Centre.

Fig. 4