Electrolux DMPL0150SW User Manual - Page 7
Browse online or download pdf User Manual for Ventilation Hood Electrolux DMPL0150SW. Electrolux DMPL0150SW 28 pages.
Print Page
4. CONTROLS
Button Function
Short pressure
If the window is open, Turn ON/Off the engine at
the first speed, the display will show 1.
If the window is Close, nothing function
Pressing and holding the button for about 2 seconds
If the window is Close, open the window, and turn on
the engine at second speed , the display will show 2.
A
If the window is Open, turn OFF the engine and
close the window.
NOTES: If during movement, the window meets an
obstacle, the window is stops and the display will
shows F flashing, to restore the movement, press
the button A again for 2".
Decreases the motor Speed in 4 steps: b - 3 - 2 - 1
b= Intensive speed timed to run for 6 minutes.
When the filters alarm is triggered, the alarm can
B
be reset by pressing and holding this button for
approximately 3 seconds. These indications are only
visible when the motor is turned off.
Increases the motor Speed in 4 steps: 1 - 2 - 3 - b
b= Intensive speed timed to run for 6 minutes.
Press and hold for approximately 2 seconds to
C
Enable/Disable the Activated Charcoal Filter alarm.
These indications are only visible when the motor
is turned off.
Delay function
Activates / Deactivates the Delay Function, switching
the motor off after 15 minutes. This function cannot
be activated while at Intensive Speed. It can also
D
be deactivated by pressing the Motor OFF button.
Pressing the button for about 2 sec.,turn ON the
engine at Breeze velocity, the display will show b – r
, this velocity is turn OFF the engine after 1h
E
This symbol lights up after 100 hours in operation,
indicating the Grease Filters saturated alarm.
F
This symbol lights up after 200 hours in operation, in-
dicating the Activated Charcoal Filters saturated alarm.
G
This symbol lights up when the Delay function is
enabled
ENGLISH
Display
Displays 1
-
Displays 2
-
Displays 1, 2, 3, or b
Displays 8 three times
Displays 1, 2, 3, or b
Displays C twice = Enabled
Displays C once = Disabled
Displays the symbol
Displays b - r
On/Off.
On/Off.
On/Off.
7