Electrolux EFC 009 X User Manual - Page 10

Browse online or download pdf User Manual for Ventilation Hood Electrolux EFC 009 X. Electrolux EFC 009 X 16 pages. Electrolux cooker hood

Print Page

Carbon filter saturation led

The LED marked C indicates carbon filter needs

to be replaced.

This must be done after approximately 160

hours of use.

Read the instructions provided for replacing the

carbon filter.

To restore the LED for the filter

warnings.

After cleaning of the grease filter and exchange

of the carbon filter, press button A for about 3

seconds until the LED F stops flashing.

Maintenance

Before performing any maintenance

operation, disconnect the hood from

the electricity.

Grease filter

This serves to hold the grease particles in suspen-

sion.

The metal filter should be washed when the grease

filter saturation LED flashes, normally once per

month.

Wash it with warm soapy water or, if possible, in

the dishwasher (60°C).

Let dry before reinstalling.

Carbon filter

This filter dissolves cooking odours.

It should be changed when the Carbon filter

saturation LED flashes. Ask the technical assist-

ance service or manufacturing company for a new

one.

The carbon filter must never be washed.

To remove the carbon filter, first remove the

grease metal filters and then unscrew the two

screws that holds the grease filter and pull the

filter down (Fig. 12).

Cleaning

To clean the outside of the hood use a cloth mois-

tened with denatured alcohol or neutral liquid

detergents. Never use products containing

abrasives.

Correct ventilation

To have the cooker hood working correctly the

windows in the kitchen should be closed. In stead

a window in an adjacent room should be open.

(Fig. 13)

Fig. 13

Attention

Failure to observe the rules for cleaning the appli-

ance and changing and cleaning the filters may

cause fires. Therefore, we recommend observing

these instructions.

Fig. 14

Changing the lighting elements

With the help of a screwdriver remove the screw

that secures the lens (Fig. 14).

Remove the lens

Replace the damaged part with one of equal

rating.

Mount the lens and secure it with the screw.