Andrew James Retro Blender Manual - Page 6
Browse online or download pdf Manual for Blender Andrew James Retro Blender. Andrew James Retro Blender 6 pages.
Print Page
Assembly of the glass jug (Please refer to the illustration on page 5)
1.
Put the rubber sealing ring (4) on the inner edge of the blade unit (6).
2.
Put the blade unit (5) into the sealing ring and press the ring into the cup
base (6).
3.
Mount the glass cup (3) onto the cup base unit and turn the cup base unit in
a clockwise direction until it is fixed.
4.
After putting the ingredients in the cup, fix the lid (2) onto the cup. Please
ensure that it is securely fitted.
5.
Insert the inner cover (1) into the opening of the lid and turn it in a clockwise
direction until it is locked.
Inserting the glass jug
Make sure that the blender is switched off (switch to the "0" setting).
Place the jug assembly (7) onto the motor block (8).
Using the appliance
1.
Place the ingredients you wish to process into the glass jug.
2.
Put the lid on the glass jug and close it securely. Place the inner cover into
the hole in the lid and turn it clockwise to lock it.
3.
Switch on the motor block with the toggle switch or push switch (please refer
to the table located on page 7 for a reference to settings).
4.
After using the blender, always move the switch into the "0" setting and
unplug the appliance from the mains outlet. To remove the glass jug just lift
it up to remove it.
6
Table of speed settings
Speed setting
Position 1
Position 2
Position pulse P
Helpful tips
To achieve the best results when pureeing solid ingredients, place small
portions into the glass jug one by one instead of placing a large quantity all
at once.
If you are processing solid ingredients, cut them into small pieces (2-3cm)
first.
When mixing solid ingredients start off with a small amount of liquid and
gradually add more liquid through the opening in the lid.
Always place your hand on top of the blender when you are operating the
device.
Be careful when processing hot liquids.
When stirring solid or thick ingredients it is recommended to use the
blender on the pulse (P) mode to prevent the blades from becoming stuck.
Use
For light usage with liquids
For a more solid consistency i.e. for
mixing liquids and solid foodstuffs
For ice crushing & short, powerful
impulse movements (you have to push
the position pulse switch repeatedly)
7