Atlantic STEATITE 886090 Documentation For Installation And Use - Page 7
Browse online or download pdf Documentation For Installation And Use for Water Heater Atlantic STEATITE 886090. Atlantic STEATITE 886090 17 pages. Electric storage water heater, mains pressure electric storage water heaters 150/200/250/300 litre
Print Page
If the cut-out continues to trip, replace the thermostat. Never by-pass the
safety device or the thermostat. Connect the power supply only via the
terminal.
The thermal cut-out fitted to the auxiliary electric heating element must be
replaced by an authorized agent. Failure to respect this clause invalidates
the warranty.
DANGER: The operation of the thermal cut-out indicates a possibly
dangerous situation. Do not reset the thermal cut-out until the water
heater has been serviced by a qualified person.
VS/HM Steatite
Adjusting the thermostat
Adjusting the temperature
The factory temperature setting
is 65° C.
The temperature may be lowered
by turning the wheel.
General maintenance
Parts that can be replaced
• Thermostat
• Cover
• Heater body (only for Steatite water heaters)
The seal must be replaced if the heater body is replaced or opened.
the manufacturer's original parts.
Potentiometer
-
+
-
+
• Heater element
• Seal
7
-
+