AirTech ATP-400B User Manual - Page 8
Browse online or download pdf User Manual for Radio AirTech ATP-400B. AirTech ATP-400B 8 pages. Land mobile radio (lmr)
Print Page
Voltage
Duty
time
(5-5-90)
2. Charger
Input power
Operating temperature
Connect the charger to an appropriate outlet (90~250 VAC).
Turn the transceiver power off and place the radio into the
front socket of the charger. The red light illuminates during
charging and the green light comes on when the charge is
complete. When you place two batteries in the charger at the
same time, the front battery will charge first. The rear battery
will begin charging when the front battery charge is complete.
Red
On
Charging
Blinking
Abnormal battery
Green
On
Fully charged
Orange
On
Stand-by for charging (rear cup)
Blinking
Discharging
When you put a battery in the rear cup of the charger the
charger checks the voltage. If voltage is over 7.4V, the
charger starts discharging for 4 minutes then checks
again. If voltage is still more than 7V, it discharges until
the voltage is 6V then starts charging.
DC 7.5V
Over 8 hrs
(90~250VAC)
10-30 deg. C