Bosch 6 Series User Manual And Installation Instructions - Page 15

Browse online or download pdf User Manual And Installation Instructions for Refrigerator Bosch 6 Series. Bosch 6 Series 16 pages. 2 door top freezer, inox-easyclean
Also for Bosch 6 Series: User Manual (24 pages), Instructions For Installation And Use Manual (20 pages), Instructions For Installation And Use Manual (20 pages), Instructions For Installation And Use Manual (20 pages), Instruction Manual And Installation Instructions (48 pages), Instruction Manual (16 pages), Instruction Manual (48 pages), Installation Instructions Manual (27 pages), Instruction Manual (12 pages), Installation And Operating Instructions Manual (36 pages), Instruction Manual (16 pages), Instructions For Installation And Use Manual (16 pages), Instructions For Use Manual (29 pages), Information For Use (32 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Information For Use (28 pages), User Manual (23 pages), Instruction Manual (24 pages), Installation Instructions And Instructions For Use (24 pages), Information For Use (16 pages), User Manual (36 pages), User Manual (32 pages), User Manual (28 pages), User Manual (28 pages), Instruction Manual (28 pages), Information For Use (20 pages), Instruction Manual (28 pages)

Bosch 6 Series User Manual And Installation Instructions
Restore the control panel cabling and the cabling
5.
for the lighting.
The plug can only be inserted into one position.
Ensure that the connector has engaged correctly.
6.
Fit the grease filters.
7.
To avoid causing damage, do not bend the grease
filters.
Attach and close the filter cover.
8.
Establishing the exhaust air connection
Secure the exhaust pipe to the air pipe connector.
1.
Establish the connection to the exhaust air opening.
2.
Seal the joints.
3.
Establishing the connection for the circulated
air
The standard recirculation kit is available as an access-
ory.
Secure the exhaust pipe to the air pipe connector.
1.
Connect the pipe to the opening on the fitted unit.
2.
Screw the air guide grille to the fitted unit.
3.
Seal the joints.
4.
Connecting to the power supply
Insert the mains plug into the protective contact
1.
socket.
If a fixed connection is required, follow the instruc-
2.
tions in the section
→ "Instructions for the electrical connection",
Page 12.
Removing the appliance
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
Disconnect the appliance from the power supply.
1.
Loosen the exhaust pipe.
2.
Open the filter cover if required.
3.
Remove the grease filters.
4.
To avoid causing damage, do not bend the grease
filters.
Remove the frame.
5.
Undo the control panel cabling and cabling for the
6.
lighting.
Loosen the screw connection with the fitted unit.
7.
Slowly take the appliance down.
8.
Installation instructions en
15