Bosch 8 Series Instructions For Installation And Use Manual - Page 15

Print Page

Fitting the frame cover

Slide the frame cover up.

Thread the mains power cable through the

Note:

opening in the frame cover and, if necessary,

carefully pull it down.

Fit the frame cover onto the four bolts at the edge of

the frame.

Slide the frame cover approx. 5 mm to the

Note:

right until you hear it click into place.

Tighten the bolts at the edge of the frame.

Secure the covers to the magnets to hide the bolts

at the edges of the frame.

Attaching and aligning the appliance

Manually open the cable tensioners until the cable

can be inserted in it. Do not use any tools.

Do not open the cable tensioners fully. The

Note:

cable tensioners may fall into the appliance.

Enlist the help of a second person to lift the

appliance and thread the cables into the cable

tensioners on the top of the appliance.

Never shorten the cables.

Note:

Taking care to comply with the safety clearances,

slide the appliance up and level it.

If you need to position the appliance lower down, lift

it up

, push the cable tensioners down

the cables back out of the cable tensioners

After aligning, tighten the cable tensioners so that

they are hand-tight. Do not use any tools.

Installation en

and pull