Atlantic MD1250 Product Manual - Page 2

Browse online or download pdf Product Manual for Water Pump Atlantic MD1250. Atlantic MD1250 17 pages. Md-series
Also for Atlantic MD1250: Operating Manual (6 pages)

Print Page

Introduction

Thank you for selecting the TidalWave MD-Series pump. Before using this pump please

take a moment to review this manual.

To avoid an accident do not use the pump in any way other than as described in this

manual. Please note the manufacturer cannot be responsible for accidents arising because

the product was not used as prescribed. After reading this manual keep it as a reference in

case questions arise during use.

Flow Chart (GPH):

MODEL

MAX FLOW

MD250

300

MD350

370

MD550

650

MD750

790

MD1000

1080

MD1250

1330

MD1500

1560

MD1000, MD1250 and MD1500 pumps include an 1½" adaptor for use with the Triton Check Valve and

Atlantic Plumbing Kits. This adaptor makes the discharge height of the Mag Drive Series pumps equal to the

TW2400 pump. If using a Mag Drive Series pump with the Triton Check Valve, Colorfalls Kit or Fountain Basin

Plumbing kits, please reference the plumbing instructions for a TW2400 as outlined in the installation manuals

for these items.

Prior to Operation and Installation

When the pump is delivered, first perform the following checks:

• Check for any damage to pump and power cable that may have occurred during

the shipment.

• Check the model number to make sure it is the product that was ordered and verify the

voltage and frequency are correct.

Caution

• DO NOT operate this product under any condition other than those for which it is specified.

Failure to observe this precaution can lead to electrical shock, electrical leakage, fire, water

leakage or other problems.

• The pump is a 110/120 volt 60 Hz pump, please only use with a power supply voltage within

110-120 volt 60 Hz.

• Never place your hand or any object in or near the inlet opening while this equipment is

operating. If pump inlet is clogged, always turn off the power supply and wait until the

motor is completely stopped before attempting to remove any clogged material.

• Please make sure that the power plug and the AC outlet receptacle are protected and away

from water or pump discharge hose to prevent accidental electric shock or short circuit.

• Always operate the pump completely submerged in water.

• Avoid dry operation, which will not only lower performance but can cause the pump to

overheat/malfunction, leading to electrical leakage, shock or premature failure.

• Always turn off power or unplug the pump prior to performing any maintenance or placing

your hands into the water.

• CAUTION:

THIS PUMP IS TO BE USED IN A CIRCUIT PROTECTED BY A GROUND CIRCUIT INTERRUPTER.

10'

145

385

465

785

275

1040

580

1255

780

15'

20'

25'