Drew & Cole VERTI STEAM PRO User Instructions - Page 9

Browse online or download pdf User Instructions for Kitchen Appliances Drew & Cole VERTI STEAM PRO. Drew & Cole VERTI STEAM PRO 16 pages.

Print Page

Setting up the steamer

• Once the water tank is full – plug the unit in.

• Press and release the white 'on/off' button (on the top back of the unit) in – until the light

begins to flash.

• The light will flash whilst the unit is getting up to temperature.

• It will take approximate 45 seconds to reach temperature.

• When the unit is ready to use, the light will change to a fixed 'on'.

• The steamer will automatically go into stand-by after 15 minutes if it is not used. If the

trigger is locked into place it will still automatically go into stand-by.

Ready

• To turn off keep button pressed until blue light goes off.

Press and

release

button

to turn on

Approximately

45 secs