Drew & Cole Pressure King Pro User Manual - Page 7

Browse online or download pdf User Manual for Electric Pressure Cooker Drew & Cole Pressure King Pro. Drew & Cole Pressure King Pro 10 pages. 5 litre
Also for Drew & Cole Pressure King Pro: User Manual (10 pages)

Drew & Cole Pressure King Pro User Manual
P R E S S U R E K I N G P R O 5 L I T R E
LID ON Pressure Mode
• Please note the pressure cooker functions will only operate when the lid is in place correctly and is displaying
"00:00".
1 2
Select a function (see opposite page)
If the lid is opened before the pressure cooker
comes to full pressure it will have an audible
BLEEPING sound and the LED display will show
"Lid", the cooker will stop heating.
Once the lid is closed correctly the LED display
will show "On" and the cooker will continue the
cooking cycle.
Please note the BROWNING function will not
operate with the lid on.
P R E S S U R E K I N G P R O 5 L I T R E
• Set the pressure release valve to closed. The pressure release valve is designed to be loose as a safety feature.
• Select the desired cooking function, the display will show the preset time. If you want to amend the cooking
time you can move it by 1 minute intervals by pressing the "+" or "-" buttons whilst the display is flashing.
• "
" will start rotating in the display. This is indicating that the pressure and heat are being created. Steam
will be released through the float valve, it will rise and steam release will stop. The pressure cooker is now
at correct pressure. Once the correct temperature and pressure is reached the chosen programme will be
displayed and the countdown will begin. Please note that for the STEW FUNCTION, the "
but once pressure has been reached the countdown will begin.
• Once cooking has finished the pressure cooker will "bleep" and it will switch automatically into "Keep warm"
function, and "
" will be displayed this will keep the food warm for 24 hours.
• To switch off the keep warm function press cancel.
• The pressure valve now needs to be moved slowly to the open position, this will release the pressure. Turn
the pressure release valve to open, this will release the steam and pressure. Only once all the steam and
pressure has been released and the float valve has gone back down can the lid be removed. Never force
the lid off. Please see below for further advice on pressure releasing. If liquid starts ejecting from the pressure
valve while releasing the steam, the food is not suitable for this quick release method. Instead use the natural
release method, allowing the float valve to drop naturally as it cools.
QUICK RELEASE
Recommended for:
- Quick cooking recipes and steaming, including
vegetables and seafood.
When the Keep Warm function has been cancelled,
move the pressure release valve to the open
position and only attempt to open lid when all
steam has released and the float valve has
dropped.
- Leave the pressure cooker to stand for 1 - 2
minutes.
- The Lid can now be opened, if the lid does not
open, wait a few more minutes and try again. Never
try to force the lid off as a locked lid is a sign that
the unit still has some pressure.
WAIT AT LEAST 1-2 MINS
For both methods, give the cooker a few gentle shakes while holding the base unit handles to release
any residual steam before opening the lid. There could still be steam held under the food that has not yet
broken the surface. Without gentle shaking, this steam could come to the surface even several seconds
after the lid has been removed.
CLOSED
OPEN
SLOW RELEASE
Recommended for:
- Food with skins (e.g sausages, chicken and fruit)
and foods with large liquid volume or high starch
content (such as porridge, soup, pasta, rice, fruit
and grains, and also delicate foods such as meats
and potato) can trap air and cause the food to foam
and expand which may cause splashing of hot food
after the lid is removed.
To avoid any splashing, after you have cancelled
the Keep Warm function leave the pressure release
valve in the closed position and allow pressure
to release naturally. This can take 15 minutes or
more. Recipe dependant.. When the float valve has
dropped, move the pressure release valve to open
to ensure all the pressure is released.
- The Lid can now be opened, if the lid does not
open, wait a few more minutes and try again. Never
try to force the lid off as a locked lid is a sign that
the unit still has some pressure.
WAIT AT LEAST 15 MINS
" will not rotate
1 3